List-Magnetik GmbH

Which device for which task?

 

From the question to the right device

Magnetic field measuring devices to measure residual magnetism

The earth's magnetic field is 0.2 A / cm strong. Just a little more residual magnetism on steel parts and chips will stick. Recognize the magnetic field around your workpiece.

MP-800

Magnetic Field Meter/Gaussmeter MP-800
 

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000

MP-1

Residual Magnetic Field Meter MP-1
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 Magnetometer / Gaussmeter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe F35, ø 8mm with a defined measuring distance of 2.0 mm.
more info more infomore info

Magnetic field measuring devices to measure the peak value

In order to detect the highest value of the magnetic field, the entire magnet must be examined. With the peak value memory you can be sure that you will not miss this point.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 
more infomore infomore info 

Magnetic field measuring devices to measure the magnetic field on flat or curved material

for example on sheet metal, spheres, cuboids - wherever you can see the surface and place the probe on

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000

MP-1

Residual Magnetic Field Meter MP-1
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

Model MP-800A
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With measuring probe P-A2 or P-A4
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With measuring probe P-A2
 Magnetometer / Gaussmeter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe F35, ø 8mm with a defined measuring distance of 2.0 mm.
more infomore infomore infomore info

Magnetic field measuring devices for measuring magnetic fields in gaps, notches, bores, on running surfaces

- in other words, in places that cannot be reached with the axial probe. Or if the measuring direction has to be tangential.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

Model MP-800T
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With measuring probe P-T2 or P-T4
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With measuring probe P-T2
 
more infomore infomore info 

External probes for magnetic field measuring devices

The probe is attached to a 1.5 m long spiral cable. The probe is easy to replace, and the cable can also be replaced separately if it is defective. An external probe is advantageous if the result cannot be read directly on the integrated measuring device.
 

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
 For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. 
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 
 more infomore info 

Magnetic field measuring devices with exactly 2 mm measuring distance

A de facto industry standard when measuring the magnetic field strength on ball bearings is a 2 mm distance between the sensor and the end of the axial probe. This means that measurement results for the customer and supplier can be compared. Because: the distance is a major factor in the measured values.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000

MP-1

Residual Magnetic Field Meter MP-1
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

MP-800A
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With measuring probe P-A2 or P-A4
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

With probe P-A2
 Magnetometer / Gaussmeter for the determination of residual magnetism on steel parts. Measuring probe: Axial field probe F35, ø 8mm with a defined measuring distance of 2.0 mm.
more infomore infomore infomore info 

Magnetic field measuring devices for measuring units of measurement Gauss (Gs or G)

- instead of the standard A/cm, you can also measure in Gauss. Or in Oersted, an earlier unit in the CGS system of units. Both are equal in amount.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

For professional measurement of direct and alternating fields.

Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. 

For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 
more infomore infomore info 

Magnetic field measuring devices for measuring Tesla (T or Millitesla mT) units

- The Tesla is a derived SI unit of measurement for magnetic flux density and is named after Nikola Tesla.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000
  
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
  
more infomore info  

Magnetic field measuring devices for measuring alternating magnetic fields (AC)

- Alternating magnetic fields are generated by coils through which alternating current flows. The magnetic field follows the level and direction of the applied voltage with a phase shift

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A. 
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 
more infomore infomore info 

Magnetic field measuring devices for measuring crack tests

- an alternating magnetic field is generated by a coil, which induces eddy currents in the material to be examined. If the resulting alternating fields are homogeneous and constant, the material is OK. Cracks "swirl" the magnetic field; they can be recognized by cracks in the measured value.

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000

MP-1000

Magnetic Field Meter/Gaussmeter MP-1000
 
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
 
more infomore infomore info 

Statistical values

Evaluation of measurement series according to number, minimum, maximum, mean value and standard deviation

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000
  
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance. For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.
  
more infomore info  

Data logger

Storage of measured values and statistical evaluation according to number, minimum, maximum, mean value and standard deviation

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000
  
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

500 values
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

10000 values
  
more infomore info  

Interfaces

Transfer of the data to a PC or mobile Android device

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000
  
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

Via Bluetooth to Windows PC and Android
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

Via USB cable to Windows PC
  
more infomore info  

Printer

A small mobile printer is ideal for direct documentation of measurements

MP-800

Magnetic Field Meter/Gaussmeter MP-800

MP-2000

Magnetic Field Meter/Gaussmeter MP-2000
  
For measuring magnetic constant and alternating fields with an axial field probe or a tangential field probe Measuring probe MP-800A: Axial field probe ø 8mm with a defined measuring distance of 2.0 mm Measuring probe MP-800T: Tangential field probe 1.7 mm thick with 0.9 mm sensor distance.

Via bluetooth to the printer TOP-PRINT4
For professional measurement of direct and alternating fields.
Usable measuring probes: Axial probes P-A2, P-W2 and P-A4, tangential probes P-T2, P-T4, P-Z2, P-Z4 and P-T4A.

By cable to the printer TOP-PRINT4
  
more infomore info